Deploying a virtual SMC (Steelhead Mobile Controller) is quick and simple. Here, I provide screen shots for a step-by-step look at the process. At the time of this writing, the latest version of SMC software is 4.0.

 

To begin, you will need to download the latest virtual edition of SMC from the Riverbed Support site. The latest virtual edition will not necessarily be the latest and greatest. In this example, I will install vSMC v3.1.3d (latest on the Support site) and upgrade it to version 4.0. You will need an ESX host and vCenter or vSphere to deploy the .OVA package. I am using VSP resources on a Steelhead EX-760 as my ESX host.

 

From vSphere or vCenter, deploy the CMC .OVA file as you would with any .OVA:

 

vSMC4-1-OVA.png

 

Verify the template contents and select Next.

vSMC4-2-Next.png

 

Customize the virtual machine name or keep the default.

vSMC4-3-Name.png

 

Since this VM is for lab purposes, I will select "Thin" provisioning.

vSMC4-4-Thin.png

 

Make sure the interfaces are assigned properly. Primary should be mapped to rvbd_pri and Aux should be mapped to rvbd_hpn. You may have to switch these from their default assignments. If you cannot access the SMC virtual machine after deployment, check these assignments.

vSMC4-5-interface.png

 

Verify the configuration and begin the deployment.

vSMC4-6-Finish.png

 

Deployment should take just a few minutes.

vSMC4-7-deploying.png

 

After deployment, power ON the virtual SMC machine.

vSMC4-9-powerON.png

 

Open a console window to observe the boot process.

vSMC4-10-Console.png

 

When the machine is finished booting, enter the default credentials of admin / password. The configuration wizard will then start - select "yes" to use the wizard. There are 8 steps to the wizard. Note that this process is the same for both virtual and hardware-based SMC appliances.

vSMC4-11-Login-JumpStart.png

vSMC4-12-verifySettings.png

 

Upon completion of the wizard, you may now be able to browse to the virtual SMC in order to upgrade to the latest SMC release. Depending on the SMC version deployed, the location of the upgrade feature could be different than what I show here. For versions prior to SMC v4, click "Setup" on the top menu bar, then "Upgrade Software" on the left-hand selection pane.

vSMC4-13-upgrade1.png

 

I will be upgrading from 3.1.3d to 4.0 using a local file on my laptop.

vSMC4-14-upgrade-to-4.png

 

When the new software is copied to the virtual appliance, it will be selected as the target upon the next reboot.

vSMC4-15-reboot.png

 

When upgrading to SMC v4, you will notice the enhanced UI. It now closely resembles the UI of other Riverbed products such as Riverbed Steelheads.

 

vSMC4-16-New-4-screen.png

 

At this point you can add any required licenses.

Deploying a virtual CMC (Central Management Controller) is quick and simple. Here, I provide screen shots for a step-by-step look at the process. At the time of this writing, the latest version of CMC software is 8.0.

 

To begin, you will need to download the latest virtual edition of CMC from the Riverbed Support site. The latest virtual edition will not necessarily be the latest and greatest. In this example, I will install vCMC v6.5.3 (latest on the Support site) and upgrade it to version 8.0. You will need an ESX host and vCenter or vSphere to deploy the .OVA package. I am using VSP resources on a Steelhead EX-760 as my ESX host.

 

From vSphere or vCenter, deploy the CMC .OVA file as you would with any .OVA:

 

vCMC8-1-OVA-Deploy.png

 

Verify the template details. Note, you can change disk provisioning in a future step.

vCMC-8-2-Next.png

 

Keep the default name or create your own.

vCMC8-3-Name.png

 

I will change the disk provisioning to "Thin" since this is for a lab.

vCMC8-4-Thin.png

 

You may need to switch the interfaces. Make sure that "mgmt" is paired with rvbd_pri and "Aux" is paired with rvbd_hpn. If you cannot access the controller after the installation, check these assignments.

vCMC8-5-interfaces.png

 

When ready to deploy, select Finish.

vCMC8-6-Finish.png

 

The virtual CMC will begin to deploy. This will take just a few minutes to complete.

vCMC8-7-deploying.png

 

From vCenter / vSphere, power ON the CMC virtual machine.

 

vCMC8-9-powerON.png

 

Open a console session while the virtual machine is starting.

vCMC8-10-OpenConsole.png

 

After the virtual machine boots, enter the default credentials of admin / password. The configuration wizard will then begin - answer "yes" if you want to use the wizard. Note: this process is the same whether you are installing a virtual or hardware-based CMC.

vCMC8-11-Login-Jumpstart.png

 

There are 8 steps to the wizard.

vCMC8-12-jumpstart.png

 

Once the wizard completes, you can use a browser to access the CMC.

vCMC8-13-login.png

 

At this point, be sure to upgrade the CMC to the latest available version (i.e. version 8.0 at the time of this writing).

vCMC8-14-Upgrade_to_8.png

 

When the upgrade is completed, a reboot is required to boot to the new version.

 

vCMC8-15-upgrade-complete.png

 

At this point, you can add any required licenses.

 

For more information, see the virtual CMC installation guide by clicking here.