• NAT ???

    Hy everybody!   I have tried to replicate the Network Address Translation (NAT) layout reported within the Riverbed documentation (I'm working in the Project editor, only). I have put the ip_traffic_flow_alt fl...
    Giuseppe Jackson
    last modified by Giuseppe Jackson
  • sinkhole / blackhole attack

    Hello All,   I am thinking to purchase the Riverbed Modeler but I would like to find out if there are any who have successfully implemented sinkhole attack and/or blackhole attack in Riverbed Modeler.  I cu...
    Mike Akpoghiran
    last modified by Mike Akpoghiran
  • Antenna Pattern File

    I am trying to select antenna pattern for my transmitter. In addition to OPNET's standard antenna model files, is there a place where I can find a text or antenna pattern file that I could import to OPNET? Thanks.
    Kelvin Ma
    created by Kelvin Ma
  • Version control Riverbed Modeler 18.6

    Hi, Is there way to version control (preferably git) the code written in Riverbed Modeler 18.6 software running on a Linux system? Thanks.
    Rohith Radhakrishnan
    last modified by Rohith Radhakrishnan
  • Is there an IEEE 802.21 MIH implementation for OPNET shared by people?

    I am looking for an implementation of the Media Independent Handover (MIH) for vertical handover management  on OPNET. Thanks!
    Mohamed Kassab
    last modified by Mohamed Kassab
  • Parameter mismatch when compiling code as C++

    I've been working with custom version of the wlan_mac_hcf model. Some of the work that I'm doing is easier to implement in C++ rather than C, so I checked the "Enable C++ Code Generation" option when I compile my code...
    Loren Garavaglia
    last modified by Loren Garavaglia
  • Using Boost Threading with Opnet

    I'm trying to create a thread with one of my nodes using the boost library. My intent is that this thread will continue running in the background collecting input data for the node while to node does the more intensiv...
    Loren Garavaglia
    last modified by Loren Garavaglia
  • Voip traffic using 802.11n wifi

    Hi, i would like to ask some help. I need to examine, how co-channel and adjacent channel interference affecting voip parameters (jitter, MOS value, end to end delay). Riverbed Modeler version 17.5 A PL 6.To do this i...
    Paulius Paule
    last modified by Paulius Paule
  • How do I use the built-in CSMA/CA module in OPNET 17.5 ?

    Hello All,   I am working on building a protocol for a wireless sensor node, so to create the node, I designed and implemented a module to model the application layer, and then I used the built-in CSMA/CA modul...
    Majid Al
    last modified by Majid Al
  • How to set VoIP and Data traffic on a Workstation and Server Node

    I can trying to setup a basic network 6 Workstation nodes and one server node connected through a Ethernet 8 switch and connected with 1000Base-T cable, I need to test the network performance with normal data and IP t...
    Shaun Donaldson
    last modified by Shaun Donaldson
  • SIP in the 3GPP IP Multimedia Subsystem (IMS) - Extension

    Authors: Enrique Vazquez   More details: The SIP-IMS model is an enhancement of the original SIP model provided  in the standard model library of OPNET Modeler to allow simulations  based on the IMS ...
    Elvis Ochieng
    last modified by Elvis Ochieng
  • Hi, I start a research about  Zookeeper, a part of Hadoop. I want to simulate it in OPNET.

    I want to ask that whether the node in OPNET could simulate the Zookeeper? How to configure it? or this could not be achieved? Thank you!
    snobby feng
    created by snobby feng
  • Failure on try run opnet and external code

    I try to connect opnet with external code but I have these issues (as in file attached ) this problem appear when I try to run this command : op_mksim -net_name project1-scenario1 -c -kernel_type optimized Note: I...
    ahmed salem
    last modified by ahmed salem
  • Video Streaming Documentation

    I've currently got a project set up to simulate a security camera network, it utilizes the ma_wlan_station_adv models to simulate the security cameras and the ma_wlan_server_adv model as my destination server.  I...
    Loren Garavaglia
    last modified by Loren Garavaglia
  • Model Directory for 802.15.4/ZigBee OPNET Simulation Model-Run time errors

    Dear All, I added Model Directory for 802.15.4/ZigBee OPNET Simulation Model-Version 2.1 in both 14.5 and 17.5 OPNET versions   Model Directory of WPAN-model is not listed in 14.5 version Model Directory of WP...
    Zafar Iqbal
    last modified by Zafar Iqbal
  • Unresolved external symbol error in OPNET 14.5

    I'm trying to replicate some previous research done by a former student in my research group. The project is a simulation of security camera streaming network and was done using OPNET 14.5A. I setup OPNET 14.5 to use...
    Loren Garavaglia
    last modified by Loren Garavaglia
  • Tutorial/Demo: Creating Attribute Handlers and Attribute Converters using ETS

    This tutorial/demo aims to illustrate how to create an attribute converters to convert an old network model using older version of attributes to a new network model using newer version of the attribute. The second par...
    Elvis Ochieng
    last modified by Elvis Ochieng
  • Tutorial: Using ODK/ETS to Import/Export a Network Topology from/to a Text File

    The goal of this tutorial/demo is to show how to create a workflow to import/export a network topology from/to a text document using ETS.   When the user click on the menu item to create a scenario from a text ...
    Elvis Ochieng
    last modified by Elvis Ochieng
  • Tutorial/Demo: Running Modeler simulations using ETS code

    The goal of this tutorial/demo is to introduce some the basic ETS APIs used for running simulations. These APIs can be used to programmatically monitor and customize how/when simulations are run. Some examples of incl...
    Elvis Ochieng
    last modified by Elvis Ochieng
  • Tutorial/Demo: Modeler GUI customization using ODK/ETS

    This tutorial will cover creating a custom dialog box in Modeler, and associate commands to different actions on the dialog box. Create the menu items to be displayed in the project editor. Design and create a dialo...
    Elvis Ochieng
    last modified by Elvis Ochieng